Blow Molding Machines

Model No.	HY- 650E	HY- 750E	HY- 800E
Model No.	Single head / Accumulator one point parison control
Materials	PE/PP
Screw diameter(mm)	65	75	80
Screw L/D ratio	22:1	22:1	22:1
Screw ration speed(rpm)	15~60	15~58	15~50
Drive motor(HP)	20	25	30
Power of thickness control (HP)	3	3	3
Oil hydraulic drive motor(HP)	30	30	50
Compress air consumption(HP)	5	5	5
Air pressure(kg/cm²)	5~7	5~7	5~7
Mold clamping force(TON)	5.7	7	22
Oil tank capacity(gallon)	80	100	180
Number of heaters(ZONE)	4	5	7
Heating capacity(kW)	12.6	20	34
Total installed power(kW)	38.7	53.5	74
Dry cycle per hour(times/hr)	720	680	500
Product capacity(liter)	0.5~5	1~20	10~25
Accumulator capacity (kg)	0.8	1.5	2.5
Min./Max. diameter of product(mm)	50~200	80~260	120~350
Extruding mouth outer diameter(mm)	150	200	280
Mold open/close daylight(mm)	140~540	160~670	200~900
Length of mold(mm)	160~340	200~450	300~800
Width of mold (mm)	350	450	630
Machine dimensions L x W x H (m)	3.1 x 2 x 3	3.8 x 2.6 x 3.9	4.5 x 1.8 x 3.9
Packing dimensions L x W x H (m)	3.2 x 2.3 x 2.3	3.9 x 2.3 x 2.3	4.7 x 2 x 3
Die head dimensions L x W x H (m)	2 x 1 x 1	2.2 x 1 x 1	2.2 x 1 x 1
Net weight kg	4900	5900	10300
Gross weight kg	6000	7100	13300